10 March,

For more information, please visit our website.

Electrical Cable Types, Sizes, and Installation

An electrical cable has the purpose of transporting electrical energy from one point to another. Depending on their final application, cables can have different configurations, always basing their design on national and international regulations.

Electrical cable Voltage

An electric cable is measured in volts and, depending on these, they are categorized into one group or another:

• Low voltage cables (up to 750 V): in a variety of applications, and with thermoplastic and thermoset coatings. They are designed and built according to harmonized standards.
• Low Voltage cables (up to 1,000 V):

  (also called (0,6/1 kV) The cables in this section are used for industrial power installations in various fields (general industry, public installations, infrastructures, etc.). They are designed according to international standards (UNE, IEC, BS, UL).

• Medium Voltage cables:

  from 1 kV to 36 kV. They are used to distribute electricity from electrical substations to transformer stations.

• High Voltage cables:

  from 36 kV. They are used to transport electricity from the generating plants to the electrical substations.

Types of electrical cable by their use

Low voltage cables

Flexible cables for wiring electric cabinets. These electric cables are especially suitable for domestic use, for installation in public places and for internal wiring of electrical cabinets, switch boxes and small electrical appliances.

Energy cables for industrial facilities and public places. It is common to find power cables in applications for power transmission in all types of low voltage connections, for industrial use and for variable frequency drive (VFD).

Cables with aluminium or steel reinforcement for installations with risk of mechanical aggression. It is also common to find armoured cables in places where rodents are present, as well as in installations in premises with a risk of fire and explosion (ATEX).

The use of extra flexible rubber cables is very varied. We can find rubber cables in fixed industrial installations as well as in mobile service. Welding cables should have a rubber sheath, which allows high currents to be transmitted between the welding generator and the electrode.

High Security Halogen Free (LSZH) Cables with low smoke and corrosive gas emission in case of fire are suitable for use in wiring of electrical panels and public places, installations of all kinds in public places, individual derivations, emergency circuits, public distribution networks and also for mobile service.

These cables are specially designed to transmit electrical energy in the extreme conditions that occur during a prolonged fire, guaranteeing supply to emergency equipment such as signalling, smoke extractors, acoustic alarms, water pumps, etc. Their use is recommended in emergency circuits in places with public concurrence.

Control cables for fixed or mobile installations should be extremely flexible, as they are mainly designed for small household appliances, for the interconnection of machine parts used for manufacturing, for signalling and control systems, for the connection of motors or frequency converters, for signal transmission where the voltage induced by an external electromagnetic field may affect the transmitted signal or for power supply connections to avoid generating electromagnetic fields.

These are flexible and shielded cables for the transmission of signals between equipment in industrial installations. Especially suitable for optimum data transmission in environments with a high level of electromagnetic interference.

These cables are particularly suitable for connecting photovoltaic panels, and from the panels to the DC to AC inverter. Thanks to the design of their materials and their cover, which is especially resistant to solar radiation and extreme temperatures, they can be installed outdoors with full guarantees.

There is a wide variety of electric cables for special installations such as: temporary light garland installations at trade fairs; connections for overhead cranes, hoists and lifts; applications in submerged pumps and drinking water areas such as aquariums, purification systems, drinking water fountains or in swimming pools for lighting, purification and cleaning systems.

Aluminium cables for power transmission are suitable for fixed installation indoors, outdoors and/or underground.

Medium Voltage Cables

Medium Voltage Cable type RHZ1 with XLPE insulation, halogen free and non flame and/or fire propagating. They are cables perfectly adapted for the transportation and distribution of energy in Medium Voltage networks.

Medium Voltage cable with HEPR insulation, halogen-free and not flame- and/or fire-propagating Ideal for the transportation and distribution of energy in Medium Voltage networks.

MV-90

Medium Voltage cable with XLPE insulation, according to American standard. For transportation and distribution of energy in Medium Voltage networks.

Copper and aluminium medium voltage cable for special applications. Especially recommended for installations where there is a risk of presence of oils and chemical agents of the hydrocarbon type or their derivatives.

Top Cable has a wide range of electrical wiring. Do not hesitate to consult our catalogue and find any cable you need:

Download the Top Cable catalogue here.

Components of an electrical cable

An electric cable consists of:

• Electric conductor: which channels the flow of electricity
• Insulation: it covers and contains the electric flow in the conductor.
• Auxiliary elements: that protect the cable and guarantee its longevity.
• Outer sheath: it covers all the mentioned materials protecting them from the outside.

Types of electric conductors

• Bare wire conductor: single wire in solid state, not flexible and without coating.
• Aluminum electrical conductors: in some cases, aluminum conductors are also used, despite the fact that this metal is 60% worse conductor than copper.
• Copper electrical conductors: the most commonly used material.
• Flexible copper wire conductor: it is a set of fine wires covered by an insulating material. They are flexible and malleable.
• Single-core cable: a cable with a single conductor.
• Multi-core cable: a cable that has several conductors.

Types of insulation for electric cables

The insulation consists of placing an insulating coating on the conductor to prevent current leakage. They are classified into two large groups: thermoplastic and thermoset.

1. Thermoplastic insulation

They are most common in the manufacture of electrical cables are:

• PVC:Polyvinyl chloride
• Z1: Polyolefins
• PE: Linear polyethylene
• PU: Polyurethane

2. Thermosetting insulation

The most common are:

• EPR: Ethylene Propylene
• XLPE: Crosslinked Polyethylene
• EVA: Ethyl Vinyl Acetate
• SI: Silicone
• PCP: Neoprene
• SBR: Natural Rubber

Types of metal protections for electrical cables

In some cases, the cables may have metal shields.

• Screens: these are electrical metal protections applied to isolate the signals that pass through the interior of the cable from possible external interference.
• Armours: these are mechanical protections that protect the cable from possible external aggressions: animals, blows, etc.

Nomenclature of electrical cables according to standards

Each cable has a standard designation. This designation is composed of a set of letters and numbers, each with a specific meaning. This designation refers to a series of product characteristics (materials, nominal tensions, etc.) that facilitate the selection of the most suitable cable for your needs, avoiding possible errors in the supply of one cable by another.

When a cable does not clearly indicate these data, it may be a defective cable, which does not comply with safety regulations or guarantee the cables life and proper operation.

Link to Mingda

Designation according to type of insulation

nomenclatureCable typeRCrosslinked polyethylene (XLPE)XCross-linked polyethylene (XLPE)Z1Halogen-free thermoplastic polyolefinZHalogen-free thermosetting elastomerVPolyvinyl chloride (PVC)SHalogen-free thermosetting silicone compoundDEthylene-propylene elastomer (EPR)

Screen designation, interior lining, armature seat

nomenclatureCable typeC3Copper wire screen, helically arrangedC4Copper shield in the form of a braid, on the assembled insulated conductors.VPolyvinyl chloride (PVC)Z1Halogen-free thermoplastic polyolefin

If there is no screen, no inner lining and no armature seat, no letter is used.

Designation of the different types of armor

nomenclatureCable typeFSteel strapping arranged in a helical pattern.FAAluminium strapping arranged in a helical patternFA3Longitudinally corrugated aluminium stripMSteel wire crownMAAluminium wire crown

Designation of the outer sheath

nomenclatureCable typeVPolyvinyl chloride (PVC)Z1Halogen-free thermoplastic polyolefinZHalogen-free thermosetting elastomerNVulcanized chlorinated polymer

Conductors designation

nomenclatureCable typeKFlexible copper (class 5) for fixed installationsFFlexible copper (class 5) for mobile servicesDFlexible for welding machine cables. When there are no letters on it, the conductor is made of solid copper, class 1 or 2.ALAL If the conductor is made of aluminium, (AL) is indicated.

Tensión nominal

Ratedvoltage0,6/1 kVRated voltage 1,000V

Explanation of the number of conductors

nomenclatureCable typenGSNumber and cross-section of wires, in mm2 , with Yellow/Green conductornxSNumber and cross-section of conductors, in mm2 , without conductor Yellow/Green

Cable design rules

The cable design rules are also referenced in the marking of each cable:

• UNE
• IEC
• UNE

Additional data

nomenclatureCable typeCECE CE marking is compulsory for the marketing of the product in the European Community. This marking can be on the product or on the packaging.Manufacture dateDate of manufacture (YYMMDD). The date of manufacture is usually placed for traceability purposes. Traceability makes it possible to know who, when and where has carried out each stage of the process and with which materials.

You can review concepts through this video that we have prepared:

Dimensioning criteria of electrical conductors

There are two sizing criteria for copper conductors:

• In the AWG-American Wire Gauge, conductors are defined by specifying a number of wires and a diameter of each wire.
• In European sizing (mm2), the conductors are defined by specifying the maximum resistance of the conductor (Ω/km). Solid or flexible conductors are defined by specifying the minimum number of wires or the maximum diameter of the wires that form it. In addition, the actual geometrical sections are somewhat smaller than those indicated as nominal.

Electrical cable measurements

CROSS-SECTION in mm2(AWG)CURRENT CONSUMPTIONUSED

25 mm2

4

Very highCentral air conditioning and industrial equipment..

16 mm2

6

High airConditioners, electric stoves and electric power connections.

10 mm2

8

Medium high

Refrigerators and dryers.

6 mm2

10

Medium

Microwave and blenders

4 mm2

12

Medium

Lighting

2.5 mm2

14

UnderLamps

1.5 mm2

16

Very low

Thermostats, bells or security systems.

Types of colours in electrical cables and their meaning

The colours of the electrical cables are governed by the International Electrical Commission Standard IEC . For the identification of the conductors, the following colors are allowed: black, brown, red, orange, yellow, green, blue, violet, gray, white, pink and turquoise.

• Neutral conductor: blue. It is recommended not to use more blue conductors to avoid confusion.
• Phase conductor: black, grey or brown.
• Protective or earthing conductor: two colours, yellow and green. The use of yellow or green single-coloured cables is only permitted in places where, for safety reasons, there is no possibility of confusion with the earthing system.

Electrical wire is typically made of copper or aluminum, and these conductive materials are insulated as wires that bring electricity to various parts of your home. When you're installing new wiring, choosing the right wire or cable is half the battle.

When examining the old wiring in your home, identifying the wire type can tell you a lot about the circuit the wiring belongs to (for example, if you open a junction box and need to determine which wires go where). Wiring for modern homes is quite standard, and most homes built after the mid-s have similar types of wiring.

Below, learn the different types of home electrical wires to choose the right option for completing electrical projects accurately and safely.

Tip

Once you identify your houses wiring type, don't try to imitate it before consulting your local building codes. Any new electrical installation requires new wiring that conforms to local building codes.

Wiring Terminology

It helps to understand a few basic terms used to describe wiring. An electrical wire is a type of ­conductor, which is a material that conducts electricity. In the case of household wiring, the conductor itself is usually copper or aluminum (or copper-sheathed aluminum) and is either a solid metal conductor or stranded wire.

Most wires in a home are insulated, meaning they are wrapped in a nonconductive plastic coating. One notable exception is ground wires, which are typically solid copper and are either insulated with green sheathing or uninsulated (bare).

Warning

Many larger wires in your home carry 120- to 240-volt circuit voltage, often referred to as line voltage, and they can be very dangerous to touch. Several wires in your home carry much lesser amounts of "low-voltage" current. These are less dangerous, and with some, the voltage carried is so low that there is virtually no chance of shock. However, until you know exactly what kind of wires you are dealing with, it's best to treat them all as dangerous.

The company is the world’s best Electrical Cable For Sale supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.