skoopia offers three industrial global shutter cameras, the first being an SDI global shutter board camera, the second being an industrial IP global shutter board camera, the third -newly introduced- being a 36x optical zoom block cmaera.
You will get efficient and thoughtful service from HBVCAM.
Both industrial global shutter board camera lines are available with a motorized zoom lens as well as a CS mount.
The 36x optical zoom block is a fully integrated system allowing you to fast zoom, flash, re-focus as you expect from a global shutter block camera.
All three cameras offer the ability for trigger in and strobe out, allowing synchronization between cameras and/or synchronisation with lighting.
Note: skoopia offers industrial global shutter cameras, but partners with complementors for lighting and or optics and housing design.
All cameras skoopia markets are focused on the OEM business. Integration into an OEM product is skoopia's target. skoopia does not offer global shutter cameras that are used in production lines. Here, system integrators generate unique single camera solutions, often combined with a significant portion of software coding.
Key target markets for skoopia industrial global shutter cameras are primarily found in any setting that fast moving or fast rotating objects need to be studied. Typical applications for OEM integrated global shutter cameras are:
military
intelligent traffic systems
OEM integrated machine vision
All skoopia industrial global shutter cameras are CMOS based. All industrial global shutter cameras have a minimum resolution of 2MP and all are based on the Sony Starvis Pregius sensors.
Rolling shutter image
Fast rotation object
Global shutter image
Fast rotation object
Global Shutter overviewUnderneath you find skoopia's portfolio of industrial global shutter cameras. Since global shutter cameras are a unique type of camera, we have decided to discuss them as a separate group, although they could have also been categorized under SDI cameras or industrial IP cameras.
Detailed information on these cameras is therefore found on this separate page. For generic information on industrial global shutter cameras click here.
Industrial Global shutter cameras
Global Shutter Dimensions Sensor Zoom
skoopia name l x b x h name Video output opt/dig
board camera (p / Full HD)
G20C42S-CS 42mm x 42mm x 2mm IMX392 EX-SDI, HD-SDI, AHD, TVI, CVBS n.a./16x
G20B42S-CS 42mm x 42mm x 2mm IMX392 EX-SDI, HD-SDI, AHD, TVI, CVBS n.a./16x
G20C42S-11 42mm x 42mm x 2mm IMX392 EX-SDI, HD-SDI, AHD, TVI, CVBS M3x/16x
block camera (p / Full HD)
G21Z10S 64mm x 44mm x 43 mm AR LVDS, CVBS 10x/32x
G21Z30S 97mm x 60mm x 50 mm AR HD-SDI, LVDS, CVBS 30x/32x
G20Z36S -R 64mm x 56mm x 124 mm IMX392 LVDS, EX-SDI, CVBS 32x/32x *
G20Z36S-SR 64mm x 56mm x 124 mm IMX392 HD-SDI/EX-SDI, CVBS 32x/32x *
G20Z36S-H Housed version IMX392 HD-SDI/EX-SDI, CVBS 32x/32x **
* These block cameras are ruggedized and meet the military vibration requirements.
** G20Z36S-H is a housed version of the G20Z36S-S. This version is only available for Value Added Distributors and/or product complementors or customers in regions where there is no representation for skoopia products. Specifications of this camera are available after we have confirmed you are eligible to buy the product.
G20C4SThe industrial global shutter cameras G20C42S and G20B42S make use of a
1/2.3" Sony Starvis Pregius sensor, called IMX392.
Although both cameras can be operated in color as well as in black and white mode,
the G20B42S is not having no IR cut filter, while the G20C42S comes with IR cut filter.,
The camera is available with a motorized zoom lens that is able to zoom up to
3x times and as a CS mount industrial global shutter camera.
The motorized zoom lens has a D/N shutter installed, offering usage in pure b&w
as well as in pure color environments by fixing the D/N shutter position.
Find enclosed the key specifications of this camera.
G20C42S-CS / G20B42S-CS
Progressive Scan (P) Global Shutter camera
Hybrid Video Output support - 3G-SDI, HD-SDI, EXSDI (Support p 60/50,
i 60/50, p 30/25 720p 60/50/30/25) - ANALOG HD (p 30/25,
720p 60/50/30/25) - CVBS
Natural Color Reproduction and clear & vivid image
Enhance Local Real-time Surveillance Image Quality
Double shutter Wide Dynamic Range Compensation(WDR@30fps)
Adaptive Digital Noise Reducer(2D/3D)
Edge enhancement
Superior low light performance : Support SENS-UP
ACE (Adaptive Contrast Enhancer),
De-fog,
LSC (Lens Shading Compensation),
Digital zoom,
BLC(Back Light Compensation),
HLC(High Light Compensation),
Privacy Zone Masking,
Motion Detection,
OSD (On Screen Display
Communication - PELCO-D/PELCO-D
External Trigger
External Strobe
CS mount
Black and White version (G20B42S) is identical to the color version, but
not having the Optical Low Pass filter. Both cameras can be set
to color or B&W via settings.
G20C42S-M
Same specifcation as the G20C42S-CS, except for
Motorized zoom lens instead of CS- mount.
Key specifications of the motorized zoom lens:
x3 Day & Night Motorized Lens
Focal Length f = 3.6mm ~ 10mm
Aperture: F1.5 (wide) ~ F2.8 (tele)
FOV D H V
WIDE 93.1 85.2 54.7
TELE 41.6 36.6 21.1
Rolling shutter image
Fast moving
Global shutter image
Fast moving
Connectors are numbered & pin 1 of each connector is indicated by arrow point
1) I/O connector
Pin No. Pin Name Description
1 V+12V DC +12 V input
2 GND GND
3 GND GND
4 AV ANALOGUE VIDEO (AHD, CVBS, TVI)
5 D/N GPIO EXTERNAL DAY/NIGHT SHUTTER
6 NC
7 GND GND
8 KEY AD-KEY OSD CONTROL
9 ALARM ALARM OUTPUT
10 NC
2) SDI connector
Pin No. Pin Name Description
1 SDI output SDI video output (3G/EX/HD-SDI)
2 GND GND
3) Analog Video
Pin No. Pin Name Description
1 DC +12V DC +12V Power output
2 GND GND
3 AV ANALOGUE VIDEO (AHD, CVBS, TVI)
4) Communication
Pin No. Pin Name Description
1 GND GND
2 KEY AD-KEY OSD CONTROL
3 GND GND
4 485 EN 485 Enable
Are you interested in learning more about 2mp Global Shutter Camera Module Manufacturer? Contact us today to secure an expert consultation!
5 UART0 UART0 Tx
6 UART0 UART0 Rx
7 V+3.3 V+3.3
5) Zoom
Pin No. Pin Name Description
1 Zoom A+ Zoom A+
2 Zoom A- Zoom A-
3 Zoom B+ Zoom B+
4 Zoom B- Zoom B-
5 Focus A+ Focus A+
6 Focus A- Focus A-
7 Focus B+ Focus B+
8 Focus B- Focus B-
7) DAY/NIGHT MOTOR CONTROL
Pin No. Pin Name Description
1 Motor - Night Mode : Active Low
2 Motor + Day Mode : Active High
6) BT output (option)
Pin No. Pin Name Description
1 Y01 Luminance Data 1
2 Y02 Luminance Data 2
3 Y03 Luminance Data 3
4 Y04 Luminance Data 4
5 Y05 Luminance Data 5
6 Y06 Luminance Data 6
7 Y07 Luminance Data 7
8 Y08 Luminance Data 8
9 C01 Chroma Data 1
10 C02 Chroma Data 2
11 C03 Chroma Data 3
12 C04 Chroma Data 4
13 C05 Chroma Data 5
14 C06 Chroma Data 6
15 C07 Chroma Data 7
16 C08 Chroma Data 8
17 HSYNC Horizontal Sync
18 VSYNC Vertical Sync
19 GND GND
20 PCLK Video Data Clock
21 GND GND
22 MD-out Motion Detection Out
23 ADC Key ADC Key
24 I2C-SDA I2C Data
25 I2C-SCL I2C Clock
26 GND GND
27 GND GND
28 XTRING IN NC
29 GND GND
30 RSTN Reset
8) INTERNAL USE
No description available.
9) IRIS CONTROL
Pin No. Pin Name Description
1 DAMP+ DC Iris Damping Motor+
2 DAMP- DC Iris Damping Motor-
3 DRIVE+ DC Iris Motor Drive GND
4 DRIVE- GND
10) GENLOCK (option)
Pin No. Pin Name Description
1 Genlock in Genlock in
2 GND GND
11) EXTERNAL TRIGGER (see picture underneath)
Trigger StrobeThe global shutter block camera G21Z10S is a block camera with 10x optical zoom.
G21Z10S excels in light senstivity (AR sensor) and superior optics with resulting zoom/focus behavior.
Key features of the block camera G21Z10S:
* Global Shutter (AR)
* 10x optical zoom
* Full HD output LVDS (p60/50/30/25 and i60/50/30/25 and 720p60/50/30/25 and 720i 60/50/30/25), HD-SDI/3G-SDI is option
* CVBS output (NTSC/PAL)
* Sensor size : 1/2.7" (AR)
* Control: RS-485 & UART / VISCA & PELCO-D
* Voltage Input : DC 9V - 15V
* Power: 4 W
* Dimensions: 44mm x 45m x 65mm
* Fully Sony VISCA compatible and special commands and functions available / possible
* 9 pin FFC (Sony block camera compatible), 30pin KEL (Sony block camera compatible), MMCX SDI connector (optional).
STEP file to ease mechanical integration as well as full VISCA/PELCO command set for easy electric integration available upon request.
Fully customizable firmware. Dedicated firmwares available for dental block camera application as well as bomb inspection block camera application. Other applications are under discussion.
Upgrade connection unit available to ease customer specific firmware development
The global shutter block camera G21Z30S is a block camera with 30x optical zoom.
G21Z30S excels in light senstivity (AR sensor) and superior optics with resulting zoom/focus behavior.
Key features of the block camera G21Z30S:
* Global Shutter (AR)
* 30x optical zoom
* Full HD output 3G-SDI, HD-SDI, LVDS (p60/50/30/25 and i60/50/30/25 and 720p60/50/30/25 and 720i 60/50/30/25)
* CVBS output (NTSC/PAL)
* Sensor size : 1/2.7" (AR)
* Control: RS-485 & UART / VISCA & PELCO-D
* Voltage Input : DC 9V - 15V
* Power: 5 W
* Dimensions: 50mm x 60mm x 97mm
* Fully Sony VISCA compatible and special commands and functions available / possible
* 9 pin FFC (Sony block camera compatible), 30pin KEL (Sony block camera compatible), MMCX SDI connector (optional).
STEP file to ease mechanical integration as well as full VISCA/PELCO command set for easy electric integration available upon request.
Fully customizable firmware. Dedicated firmwares available for dental block camera application as well as bomb inspection block camera application. Other applications are under discussion.
Upgrade connection unit available to ease customer specific firmware development
The 36x Optical Zoom Global Shutter Block Camera with the Sony Pregius Sensor IMX392 is introduced mid . It combines the unique characteristics of block cameras (e.g. VISCA commands) with the specific features of the global shutter sensor.
The G20Z36S-S has HD-SDI as native output signal on board, whereas the G20Z36S supports LVDS. All other aspect are identical.
Key Features
• 1/2.3" Sony Global shutter CMOS sensor IMX392
• p 60fps/30fps, 720p 60fps/30fps
• 36x Optical Zoom(6mm~216mm) & 32x Digital Zoom
• F1.5(wide) ~ F4.8(tele)
• Day & Night(ICR)
• Digital Noise Reduction(2D+3D)
• Digital Image Stabilization
• Privacy Mask Function
• Intelligent Motion Detection
• Defog Function
• Supports VISCA, Pelco-D/P Protocol
• Video Out : HD-SDI/EX-SDI, CVBS
Note that this block camera can also be used as Global Shutter IP block camera by combining it with the skoopia SDI to IP video server (our video server accepts EX-SDI signal).
skoopia hereby declares that all global shutter camera modules are compliant with the National Defense Authorization Act (NDAA), Section 889, and these cameras do not contain chipsets or components from the list of banned suppliers under this law.
Sensor:OV Monochrome sensor from OmniVision
Sensor Resolution and Optical Format:2.0 MP CMOS Image Sensor. 1/2.9" Optical format
Sensor type:2.0 MP CMOS Global Shutter Sensor with Monochrome output
Output Format:Y16 and Y8
Customers who own platforms that support USB 3.0 and are interested in evaluating the 2.0 MP monochrome camera module can directly buy the See3CAM_20CUG from e-con Systems.
The MIPI Camera daughter card (e-CAM24_CUXVR) can be bought by customers choosing to evaluate the e-CAM222_CUMI_MOD camera solution with a direct interface on the NVIDIA® Jetson AGX Xavier™ developer kit.
The MIPI Camera daughter card (e-CAM23_CUNX) can be bought by customers choosing to evaluate the e-CAM222_CUMI_MOD camera solution with a direct interface on the NVIDIA® Jetson Xavier™ NX developer kit.
STEEReoCAM® is a 2MP 3D MIPI Stereo camera for NVIDIA® Jetson Nano™/Jetson AGX Xavier™/Jetson™ TX2 developer kit with improved accuracy and depth range.
e-CAM21_CURB® is a 2MP global shutter monochrome camera solution for Raspberry Pi 4 kit. It is based on OmniVision's 1/2.9" OV Image sensor with 3μm x 3μm pixel OmniPixel® 3-GS technology.
Customers interested in customizing the same camera module or planning to use a different camera/sensor module can contact and explain their requirement.
If you want to learn more, please visit our website USB Camera Module.