Questions You Should Know about Road Gantry

Frequently Asked Questions About Overhead Cranes.

For most of our clients buying an overhead crane isn’t a regular, monthly or yearly purchase. As a result our customers have lots of questions and we are mindful of that. We manufacturer overhead cranes and install and test swing jib cranes most weeks; we often get asked a range of questions from our customers, from “how to I order a crane” “how much power does a gantry crane draw” to “is my factory floor ok for a beam crane?” This made us decide to create an information page called “frequently asked questions about overhead cranes.”

Check now

People exploring the purchase of an overhead crane, even repeat customers ask so many varied questions, we have set out many of them below, and add to this page most weeks.

The most commonly asked questions about overhead cranes, their support steelwork and pillar jib cranes are generally:

• Buzz bar: What is crane buzz bar and how does it power an overhead crane?
• Can you tell me all about overhead cranes? 
• Can a crane column, or support steelwork be sunk into or below ground level?
• Crane servicing; when do I need to have it done?
• Crane training: Do I need to be trained to use an overhead crane?
• Different types of overhead gantry cranes what are they there?
• Do gantry or indoor factory overhead cranes need foundations?
• Electricity: How much current or power does an overhead crane use, draw or require?
• Finance: can you buy an overhead crane on finance, or hire purchase?
• How are electric overhead cranes powered?
• How do I buy an overhead crane?
• Free standing steelwork, what steel rails do I need to support a gantry crane?
• I am interested in buying a pillar jib crane, what do I need to know?
• Jib Cranes: What do i need to know before I order a pillar jib crane?
• Knee joints; what is a crane knee joint?
• Overhead cranes explained. What is an overhead crane?
• Pillar jib cranes: What to I need to know about prior to installation and testing?
• Power source for electric overhead traveling cranes: What power supply do I need to do prior to an overhead crane being installed?
• RoTE, and crane servicing an overhead crane; What is the difference, and which do I need legally?
• Training: Do I need training to use a jib crane, a gantry crane or an EOT crane?
• 10 things do I need to know before buying an overhead crane? 
• What are the most common types of factory cranes? 
• What is an EOTC? :- Electric overhead traveling crane.
• Which components make up an overhead crane?
• What is the maximum span of a crane, or how wide can an overhead crane be?
• Which crane is suitable for inside a factory?
• Why buy from an independent crane manufacturer or supplier?

No question, are too small or too silly to ask, however small or trivial. You are always welcome to call us to discuss, even if the answer is here, or even partially answered on the website.

Please call us on 894 825.

Nothing ruins a pleasant day quite like a goose egg on your head, or a throbbing finger pinch.  Avoiding those things (and, of course, the much more disastrous potential events) is the context of this gantry crane safety article.

Don’t worry, I’m not here to preach, just to give perspective.  There are some very practical ways to enhance safety that are not in the OSHA books.

A gantry crane or hoist is an incredible tool for your shop!  It opens a lot of opportunities, yet with every great tool comes responsibility.  In this case, hoist and gantry crane safety knowledge.  We’re not talking about the fiddly OSHA procedures, rather the practical things to make the work area pleasant, along with best practices for staying safe while using a crane.

This article focuses on the Gantry Crane with the illustrations and such, but the basic principles apply to all sorts of lifting — even, and perhaps especially, for custom cranes like this house crane.

Focus On The Crane

All the following ideas apply in some ways to any sort of lifting — hoist, crane, whatever.  Even jacks.  However, for purposes of this discussion, we’ll focus on gantry style cranes like in the plans store, shop tools category.  These are more than hobby style cranes with a design to take on the really tough jobs, but they still have limits, and can pose some interesting dangers.

Perhaps more important for this discussion are the little things that make a bad day.  I can’t tell you how many times I’ve ended up with a blood blister or a bruise because I didn’t quite think through what I was doing.  OK, you can laugh, because I know you’ve been there too.

Let’s face it, a good shop is full of little dangers.  It wouldn’t be fun if everything was perfectly safe.  A crane is a big tool, and it’s all around us when working with it.  Above with the beam, trolley, loads, and winches –- then below to interfere with our feet – and to the sides as well.  Understanding and managing the little risks make it more fun.  That’s where some simple thoughts about gantry crane safety come in.

Gantry Crane Safety Ideas

Here is our list of things to help in safety with a gantry crane.  It’s not definitive, and it’s not all inclusive.  However, it is broken into 2 parts — we’ll call them the ‘Big Risks’, and the ‘Be Smarts’.

Big Risks are the ones that can potentially change your life.  Not for the better.  Then, the Be Smarts are the ones that can potentially give you a bad day.

Gantry Crane Safety — Big Risks

We can’t ignore the big risks when talking about gantry crane safety.  As mentioned, these are the ones that can change your life.  Don’t short-cut these.

You will get efficient and thoughtful service from Hongrui Manufacturing.

• Always work well within the specified load limits — all of them.  You should know the load limits of every piece, and work only to the weakest link.  If the hook on the cable is the weakest link, don’t exceed it, even if the crane is capable of much more.  The lowest limit wins.
• Crane capacity is important, but there are a lot of pieces to consider — like the Lifting Mechanisms.  The trolley (for a gantry crane), a chain fall, a come-along or winch, load leveler, etc..  Failure in any of these components equals disaster.  Always choose appropriate tools for the job.
• Crane height (leg extension) and width change the crane capacity.  Know it before you lift.
• Another big one for gantry crane safety — Level lifting.  If the crane is not lifting straight and/or level, the forces will apply differently.  Having legs at a little bit of an angle will significantly reduce capacity.  You might think the crane has # capacity, but if it is sitting on a slope (like on a sloped driveway), the real capacity is perhaps only #.  Please don’t do this.  Use a crane on level ground.
• On the topic of Straight and Level, if you build a crane, please make sure it is built Straight and Square.  No need to waste your time building it if you don’t take the time to do it right.  See Hints to Achieve it.  While on that note, also make sure the welds are complete, penetrating and strong.
• Legs with wheels.  We all like the idea of casters to roll a crane around, but those casters put the leg load just off center and significantly weaken the leg.  It also puts a lot more stress on the upper joint where the top beam connects to the leg.  Wheels on the legs that carry the load significantly decrease crane capacity.  See this article on Gantry Crane Failure Modes for a graphic explanation.
• Be super careful with overhanging loads.  We talk about this just a little with our Beam Connector Clamp  and ask that you don’t buy it if you aren’t smart enough to use it properly.  Sometimes it’s the only way to accomplish something, and it’s great when you need it, but WOW, things can go wrong in a hurry if you don’t do it right.

So, those are the biggies.  For gantry crane safety, please don’t short-cut them.

Be Smart — Lift Smart

These are the “Be Smart” items that help the job go better, because gantry crane safety is about more than just the catastrophic failure modes.  While not usually life changing, these items can make a bad day.

• Rolling load.  It’s convenient to lift a load, then roll it around.  The big risk, is above, however, there are two ‘Be Smart’ parts as well.  First, if the crane is on wheels, then it’s possible for it to start rolling while lifting — before you’re ready.  Second, when rolling, the load often swings, and that has its own issues (see below).  Be very careful with rolling cranes, and make sure you can stop the rolling when needed.  As a matter of practicality, I use this Shop Cart to move the load after I lift it.  Much more controlled, and we think it’s an enhancement to gantry crane safety.
• Avoid crane and tool bump hazards.  The crane and some equipment is usually overhead — like the chain fall, winch, or come-along.  Make sure they are well marked, or padded, and generally out of the way.  For example, I really like my Winching Pole, but I have bumped my head on that thing many times.  Not severe, but I’ve learned to wear a hat when working around it.  The hat will not avoid a bump, but it certainly acts as an early warning system so my reflexes have a chance.
• Avoid trip hazards.  By nature, the crane is all around the project.  That means the crane legs can pose a trip hazard, so paint them bright, or add flags or keep them away from the immediate work area.  A piece of plywood set against them can tell the subconscious brain to avoid them.
• Dynamic loads.  Big loads that swing, bounce, or spin are a recipe for disaster.  This item can be in the ‘Big Risk’ list also.  A bouncing load can easily place 3 times the load on a crane and lift.  Swinging loads are similar, and if they hit something, they can cause a lot of unnecessary damage.  For safety, practice careful load control.

If it seems like these are common sense, you’re right.  However, common sense is not so common, so they’re worth talking about.

Built In Precautions

Sometimes the best approach to safety is to build in the safety mechanisms.  For instance, most machines have guards or interlocks.  Sometimes they are overboard, but they are always intended to take the thinking out of the safety.

The Gantry Cranes we offer here at Mechanical Elements have a few built in safety measures.  One is the spring loaded wheels.

Wheels under a crane are really nice, and they are part of what makes the mobile crane mobile.  Yet, wheels can contribute to crane failure modes.  Read more in the Wheels section of Gantry Crane Failure Modes.  To avoid that, at Synthesis we mount the wheels with limits, set by springs, to increase gantry crane safety.

Springs lift the crane so it can roll around when empty.  However, when lifting a significant load, the springs compress, and the crane sets firm on the ground.  In our design, the spring allows freedom to move with a light-ish load, but not with a heavy one.  For instance, the crane in our shop has springs set at about 125#.  With a 200# crane, it means a center load of less than 300# can roll, but above that, the crane sets down secure.  We think a 300# load is something we can control appropriately, but don’t want the risk of something like # moving (or swinging) around.

Establishing a minimum telescoping leg overlap also contributes to gantry crane safety.  This is built-in with our gantry crane plans.  Using less internal overlap can lead to compromised function (legs wobbling or not standing straight up).  The length of the feet are another example.  Theoretically a gantry crane needs only small feet, but for the practical side, and the safety side, longer is better.

Finally, by design, the cranes we offer include big gussets — which are also part of being built for strength.

Build For Strength

Gussets are another great automatic precaution.  Don’t underestimate their value in strengthening beam intersections.  Both, top and bottom.  It’s very common to see huge gussets or angle braces at the bottom (legs to the feet), but they are frequently missing at the top.  Look at this image.  While it looks good, a design without extra beam bracing at the top is kind of stupid.  [And yes, I can say that, because I did stupid once, and the joint failed.  A gusset like the one in yellow (image near the top of this page) increases joint strength drastically.]

To me, the crane in this photo is just dangerous — lacking strength in the top joint, and it’s on casters.  When it’s lifting something near the 3 ton capacity, I don’t want to be anywhere near — especially if they try to move it with the load.

What Happens When You Don’t Respect The Crane?

That’s the million dollar question.  “If I had only stopped one minute earlier . . .” .  In a fraction of a second a crane failure will significantly change the scenery.  As mentioned above, it might be inanimate damage only, or it might be life altering.  The problem is we can’t choose the outcome.  We can choose the actions, but when choose things outside the boundaries, we can’t choose the response.

The practical gantry crane safety perspectives above are all about making choices where the actions are well within our control.  That’s where we can be happiest.

The company is the world’s best Road Gantry supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Gantry Crane Safety Is A Choice