Simplify your ion analysis with the Thermo Scientific Dionex Inuvion IC system. This configurable IC system provides high-pressure operation, eluent degas and electrolytic suppression capabilities, with the option to add Reagent-Free IC eluent generation.
Orun Product Page
The easy-to-use, reliable Thermo Scientific Dionex Integrion HPIC system performs versatile and efficient analyses. It offers flexible detector configurations, automated eluent generation, and high-pressure capabilities for faster analysis without compromising data quality.
Ion chromatography is used for water chemistry analysis. Ion chromatographs are able to measure concentrations of major anions, such as fluoride, chloride, nitrate, nitrite, and sulfate, as well as major cations such as lithium, sodium, ammonium, potassium, calcium, and magnesium in the parts-per-billion (ppb) range. Concentrations of organic acids can also be measured through ion chromatography.
Ion chromatography, a form of liquid chromatography, measures concentrations of ionic species by separating them based on their interaction with a resin. Ionic species separate differently depending on species type and size. Sample solutions pass through a pressurized chromatographic column where ions are absorbed by column constituents. As an ion extraction liquid, known as eluent, runs through the column, the absorbed ions begin separating from the column. The retention time of different species determines the ionic concentrations in the sample.
Some typical applications of ion chromatography include:
Liquid Samples:
For more Ion Chromatography & Sample Preparation Solutionsinformation, please contact us. We will provide professional answers.
Liquid samples should be filtered prior to evaluation with an ion chromatograph to remove sediment and other particulate matter as well as to limit the potential for microbial alteration before the sample is run. Aqueous samples should be collected using a sterile syringe or bottle rinsed three times with sample water and then filtered through 0.45um (or smaller) filters. The collection vial should likewise be rinsed three times with filtrate before being filled brim-full of sample filtrate. Samples should be stored cold until they can be processed. The minimum sample required for analysis is approximately 5mL, with no maximum limits.
Solid samples and Organic Liquids
Solid samples can be extracted with water or acid (cations) to remove ions from the sample surface. Liquid samples must also be filtered and stored cold until analysis can be performed. The minimum sample required for a solid sample is approximately 2-3 cm2 for solids, with no maximum limits.
The diagram on the upper left shows how an ion chromatograph works to output data. Each peak represents a separate ion from the sample solution. The elution time, or time it takes for the ion to move through the column, varies for each ion species as they elute from the column separately as the pH and/or ionic strength of the eluent is increased. The concentration of ions moving through the column at a particular time is represented by the height and the breadth of the peaks and can be correlated to the concentration of a particular species in the sample solution.
The graphs on the upper right display typical data output from an ion chromatography run. The upper graph shows cation concentrations and the lower graph depicts anion concentrations from dilute glacial waters. Ion concentrations can be calculated using the area under each peak, where a larger area correlates with a higher concentration of a particular ion species. Most ion chromatography machines provide software that calculates this area, which users can convert to ppm or other quantity using calibration standard solutions.
For more detailed information regarding the theory and practice of ion chromatography, please see:
For teaching activities, labs, and resources, please visit:
Are you interested in learning more about Ion Chromatography systems? Contact us today to secure an expert consultation!