A 10m COB LED strip is a continuous-looking linear light source made with closely spaced LED chips mounted on a flexible circuit board. To buy the right one, match its voltage, power per metre, colour and protection level to your project, then confirm whether a single 10m run is permitted by the product specifications. Before installation, plan the power supply, wiring, mounting surface and access for maintenance. At ENTA Lighting, we recommend confirming these details against the strip’s datasheet rather than assuming every 10m product can be powered or installed in the same way.
Click here to get more.
This guide is for lighting distributors, contractors, project buyers and OEM teams evaluating COB LED strips for indoor applications. It is useful whether you are sourcing a standard product or comparing specifications for a custom order. The focus is practical: how to assess a 10m strip, prepare for installation and ask a supplier the right questions before committing to a project.
COB means “chip on board.” Rather than relying on widely spaced visible LED packages, a COB strip places many small LED chips along a flexible board under a phosphor layer. This construction can create a more continuous line of light than conventional strips when viewed directly. The final appearance still depends on the product design, diffuser, mounting channel and viewing distance.
The stated 10m length describes the strip supplied, not necessarily the maximum length that can be connected as one electrical run. Voltage drop, power consumption and manufacturer limits can affect uniformity along a long installation. Check the installation instructions for the approved feed method, connection points and maximum run length.
COB strips are available in different colour temperatures, colour-rendering options, output levels, voltages and protection formats. Some are intended for dry indoor locations, while coated or sleeved versions may be specified for environments where added protection is required. Protection ratings and product construction should be checked for the actual installation conditions rather than inferred from appearance.
Review the datasheet and quotation for the following details before comparing products:
For coves, shelving, cabinets and display details, a COB strip may suit projects where a smooth-looking line of light is preferred. In task areas, assess brightness, colour quality and glare along with the strip’s appearance. A diffuser can soften the visual effect, but it may also change the amount and distribution of light reaching the surface.
For a long architectural run, ask whether the strip should be powered from one end, from multiple points or in separate sections. The right approach depends on the strip’s voltage, power, conductor design and installation instructions. For damp or exposed locations, verify that the full assembly—including connections and power supply—is suitable, not just the LED strip itself.
Start with the rated voltage and power per metre. For example, if a selected strip is rated at 10 W/m, a 10m length has a nominal strip load of 100 W (10 W/m × 10 m); this is an illustrative calculation, not a specification for every COB product. Choose a power supply according to the actual product documentation, installation conditions and any recommended operating margin. Do not select a driver by length alone.
Measure the installation route and note corners, joins, control locations and access to the power supply. A 10m supplied reel equals 10,000 mm, but the usable installed length may be shorter if the layout requires cuts or connection allowances. Confirm the manufacturer’s cut interval and do not cut outside marked locations. If the run is long, ask the supplier or project electrician to confirm a suitable feed arrangement.
ENTA Lighting Product Page
Use a clean, dry, stable surface and follow the product’s mounting instructions. If using an aluminium channel, check that its internal width accommodates the strip and that the channel is appropriate for the intended installation. Plan the channel, diffuser and end caps before cutting, so the strip and accessories fit together without stressing the flexible board.
Check polarity and connection compatibility before applying power. Test the strip and controls in a safe, accessible setup before fixing the full run in place, and inspect for uneven light or connection issues. For mains-side wiring or work requiring electrical qualification, use a qualified professional and follow local regulations. Avoid bending the strip sharply, pulling on solder pads or trapping the board under a fitting.
Mount the strip according to its instructions, taking care not to stretch or twist it. Once installed, check that the full run operates as intended and that connections remain accessible where required. Keep the power supply within its specified operating conditions and provide appropriate ventilation if its installation instructions require it.
The price of a 10m COB LED strip depends on its electrical and optical specification, materials, protection format, packaging and order quantity. Custom requirements—such as a particular colour, board design, connector or private-label packaging—may affect both cost and production planning. A 10m reel length does not automatically mean the supplier has a fixed minimum order quantity of one reel.
Ask suppliers to state the MOQ, sample availability, production lead time and shipping basis in the quotation. Lead times can vary with specification, material availability and order volume, so request confirmation for your actual order rather than relying on a general estimate. For project purchasing, compare the complete bill of materials, including drivers, channels, connectors and installation accessories.
A reliable buying decision depends on clear documentation as well as the strip itself. Ask the supplier for a datasheet that identifies the exact model and provides the relevant electrical, optical and installation information. Confirm that samples, quotations and production orders refer to the same specification.
At ENTA Lighting, we can discuss project requirements with buyers and help compare product specifications, installation needs and sourcing details. Share the application, required length, target light effect, operating environment and expected order quantity when requesting a quotation. This gives our team a practical basis for recommending a suitable configuration and identifying questions that should be resolved before installation.
A 10m COB LED strip can provide a continuous-looking linear light, but choosing one involves more than checking reel length. Confirm voltage, power, output, colour, protection and cut details, then verify the permitted run and feeding method with the product documentation. Plan the mounting surface, power supply and connections before cutting or fixing the strip.
To move forward, prepare your application details and request a model-specific datasheet and quotation. Ask the supplier to confirm the electrical load, accessories, MOQ and current lead time for your order. With those details agreed, you can select the product with greater confidence and give your installer a clear, workable plan.
For more information, please visit 10m cob led strip.