Exactly what is a monobloc heat pump? With so many types of heat pumps available (and more being developed all the time), it can be hard to understand which models offer what and make a decision on the products that are best suited to your project.
Link to OUTES
When you are researching heat pumps you will very quickly learn that there are a number of different types and versions. Initially you'll probably come across ground source and air source heat pumps and, as you dig deeper, you'll realise that there are different types of air source heat pumps as well.
Not only are there versions that deliver heat to air (often referred to as air conditioning) but also those that deliver heat to water, as commonly used in our homes to deliver heat to the central heating system and hot water cylinder. Then we dig deeper and find different types of air to water heat pumps.
Monobloc heat pumps are one of the air to water heat pump options to choose from. And in this handy guide, renewables and ventilation installer David Hilton explains what monobloc heat pumps are and what they can offer homeowners.
So, how do heat pumps work? Monobloc heat pumps have all the refrigerant components housed in the outdoor case. The refrigerant pipes are all factory assembled and factory sealed. This is often referred to as 'hermitically sealed'.
There are two different types of monobloc heat pump: one with the pump, expansion and control components all built into the outside case, and the other with the pump, expansion and controls components fitted in the home.
The first type has the advantage that for a very simple installation less space is taken up inside the home, but that means that there is more wiring that needs to be installed to the outside unit and you are also limited by the pumps and sensors in that unit.
The pipework on all monobloc units is, however, outside of the heated envelope of the home so in many cases the heat pump will protect itself by ensuring there is a minimum amount of heat in the water, even if the home does not require any heat.
With monobloc heat pumps, the only connections to the outside unit are the electrical wiring and two water pipes meaning that this setup is very well suited to the UK climate, which is generally wet, rather than cold.
In colder climates, such as those experienced in mainland Europe, a split system (see explanation of what this is below) is often better due to the refrigerant not freezing up in cold weather. If a monobloc is plumbed in a cold area there is a risk that the water in the pipes could freeze and damage the system, unless the water is either treated with anti-freeze (Glycol) or antifreeze valves are fitted to protect the heat pump.
There are two main types of glycol: Ethylene Glycol (which is poisonous) and propylene glycol, which is the most commonly used of the two. Glycol protects the water from freezing and a mix of around 25% glycol in the water will offer protection against freezing down to around -10C. However, when glycol is added to water the solution is less able to hold heat and the 25% mix in the water will lower the heat carrying capacity by around 10%. It is crucial therefore to make sure that you have larger pipework plumbed in the central heating system or it may not be able to deliver enough heat. Anti-freeze valves overcome this issue but they release water when it gets really cold.
This is not really an issue as most heat pumps maintain a minimum of around 20C in the water at all times. It is in times of a power failure and ambient temperatures outside of around 3C, or less, that the valves would release water. The installer should be able to show you how to top up the water if this does happen.
Split systems are made up of two parts. Half the heat pump is outside the building and half is inside, with refrigerant pipes connecting them together. These can be more useful in colder climates or where the outside fan unit needs to be further away from the building. A monobloc heat pump does not need a refrigeration engineer to install it so the whole installation can be done by a plumber and electrician. This makes the installation simpler and therefore a bit less expensive than split heat pumps.
Monobloc heat pumps can also be less expensive than split heat pumps. Due to all the heat pump components being in the heat pump housing outside of the home there is less space required inside the home too.
While there are many advantages to monobloc heat pumps, it is important to understand their limitations and downsides in order to be able to make an informed decision. Read my Mitsubishi Ecodan 11.2kW heat pump review, the model I have in my home, to find out more.
Want more information on Monobloc Heat Pump? Feel free to contact us.
The main disadvantage to be aware of is the way in which they can, in certain cases, use energy unnecessarily.
Size variations between monobloc and split system air source heat pumps
The monobloc air source heat pump is a single unit that is placed on the outside of the residential dwelling as close to the water supply of the dwelling’s heating system as possible. The footprint of the monobloc unit is larger than that of the outdoor unit of a split system air source heat pump. However, a split system also requires internal space to be available for the indoor unit that is placed inside the dwelling.
Flexibility of monobloc and split system air source heat pumps
Although both types of air source heat pump have the same basic components, the split system connects its two units together with pipes that transfer refrigerant between them. The outdoor unit captures heat from the air, and the indoor unit transfers that heat to the heating system of the dwelling. By contrast, the monobloc unit has a closed-circuit system for the refrigerant and it connects in a similar way to a conventional gas boiler to the hot and cold-water supply of the dwelling.
This difference means that monobloc units are better situated as close to the heating system as possible to limit the length of pipe required. As the pipes carry water, they need to be insulated to prevent freezing in the winter and limit heat loss from the warm water generated by the monobloc air source heat pump. Also, as the systems containing water are outside the building, they need to be protected from frost damage by the addition of anti-freeze.
With a split system air source heat pump, freezing is not an issue as all the components that handle water are housed within the indoor unit. The two parts of the split system are connected by refrigerant pipes, rather than water pipes, and the connection can be several metres long if required, leading to greater flexibility when positioning the outdoor unit further away from the dwelling.
The same refrigerants can be used in both monobloc and split system air source heat pumps, however, there are several types that are available for use. Always seek advice from the heat pump manufacturers on any health and safety issues with the refrigerant and check its global warming potential (GWP) for it impact on the environment.
Noise considerations for monobloc and split system air source heat pumps
The overall noise levels of monobloc and split system air source heat pumps are similar, however, the advantage of the split system is the ability to place the fan unit farther away from the dwelling. This distances the source of any potential noise issues from the occupiers and could play a part in projects with a focus on acoustic comfort.
Installation differences for monobloc and split system air source heat pumps
Installation of a monobloc air source heat pump is more straightforward than that of a split system air source heat pump as the connections are to the water supply of the heating system. For split systems, the refrigerant lines running between the two units requires the installer to have F-Gas qualifications and the lines need to be checked for leaks on a yearly basis.
How can you decide if a monobloc or split system air source heat pump is best for your project?
Deciding whether a monobloc or a split system air source heat pump is your best choice will depend upon the heating demand of the dwelling, project limitations on external and internal space, the position of units, acoustic and aesthetic requirements, and the availability of suitably trained installers.
If you would like to learn more about the specification choices that the Dimplex range of monobloc air source heat pumps and split system air source heat pumps can offer to help meet your project requirements, please contact one of our pre-sales team specialists.
Contact us to discuss your requirements of Commercial Heat Pump Manufacturer. Our experienced sales team can help you identify the options that best suit your needs.