This QR code systems works just as intended with USB. Very well put together. It comes with a cable to help you attach it to your custom circuit as well. WARNING! No where does it say that it operates on 3.3V for the logic levels on TX and RX. I used a translator, because the operating voltage specified was 5V. So I assumed the logic was also at 5V. Since this is true, I would not recommend plugging the TX line from an Arduino UNO into the RX line of the QR code reader as without more data , this could potentially damage the device. The seller of this QR code reader needs to specify that it operates at 3.3V logic with a 5V power supply to it.
If you want to learn more, please visit our website WCMI.
Barcode Scanner Module, 1D/2D Codes Reader
Are you interested in learning more about Barcode Scanner Module Price? Contact us today to secure an expert consultation!
This is a small 1D/2D codes reader, by using the intelligent image recognition algorithm, it will decode the barcode or 2D code on paper or screen, fast and accurately.
Through the onboard USB and UART interface, it can be directly plugged into a computer, or be easily integrated to kinds of devices due to its small form factor.
Wiki : www.waveshare.com/wiki/Barcode_Scanner_Module
Want more information on Queue Busting System? Feel free to contact us.