Say goodbye to waiting for hot water. A hot water recirculating pump provides a warm shower on demand.
When you turn on the tap, how long does it take to get hot water? Letting it run can waste money and water, not to mention time and patience.
One solution ensures you’ll never have to wash your hands in cold water again: a hot water recirculating pump. These handy devices are game changers.
What Is a Hot Water Recirculating Pump?A hot water recirculating pump attaches to your water heater. It circulates hot water throughout your pipes to keep it readily available at the faucet. It’s affordable and doesn’t waste water. (Psst! Here’s how to save money this winter on your energy and water bills.)
“The recirculating pump costs about the same as operating a 25-watt light bulb,” says Umberto Griccino, a commercial plumber and HouseGrail consultant.
Many systems turn on and off automatically to keep the water within a specified temperature range. Others run on a timer. Both options use less energy than a continuously-running system.
Types of Hot Water Recirculating PumpsThere are two main types. One requires an additional plumbing line to send unused water back to the water heater after it drops below a set temperature. The other returns the unused heated water via your existing cold water pipes.
The first type is best for new construction. Along with the usual hot and cold lines, a plumber will install a third pipe to return the unused hot water, usually between the water heater and the furthest fixture. A full system like this is expensive and difficult to install in an existing home.
The second type, called a comfort system, is cheaper and a much easier choice for existing homes, says Griccino. The unused heated water runs back through the cold water pipes. Since it uses the same pipes for warm and cold water, there’s one major drawback: It takes longer to get cold water. A system with a temperature sensor can correct this problem.
Why To Get a Hot Water Recirculating PumpAccording to the National Resources Defense Council (NRDC), studies suggest that “over 10 percent of all the hot water drawn for showering in a typical single-family home is wasted waiting for hot water to arrive.”
Much of the water sitting in those pipes was once heated. Without a recirculating pump, it’s left in the pipes to cool. That’s a lot of water, energy and money down the drain.
How much money does a hot water recirculating pump really save? While it can save some, it’s mostly for convenience. “In 12 months, they can save you roughly $120,” says Griccino.
A recirculating pump is relatively affordable. So even if you save less than $120, it can still pay off quickly. The time saved might be enough to justify the initial cost, even without a major reduction in utility bills.
To save more water, combine a hot water recirculating pump with water-efficient appliances and fixtures. A dual-flush toilet and efficient shower head go a long way toward cutting utility bills.
Hot Water Recirculating Pump Costs and ConsiderationsGriccino says a hot water recirculating pump costs about $200, and many comfort systems can be DIY installed. Better to go with professional installation if you need new plumbing.
DIYers should install the pump near the water heater and power source, and the sensor valve at the fixture furthest from the heater, Griccino says. Turn off and drain the water heater before beginning work. If you’re unsure about your DIY plumbing ability, contact a pro.
Hot water recirculating systems need little maintenance. Keep an eye and an ear out for leaks or unusual sounds. If you do run into a problem, Griccino says call a plumber immediately. Barring any malfunction, you should get about 10 years of use from the pump.
Hot water is a modern convenience that most of us typically don’t think much about. However, if you have ever had to wait several minutes for the water coming out of the faucet to heat up, you may be interested in learning more about hot water recirculating pumps. Rather than only sending hot water to your faucet when you call for it, these types of systems ensure that there is always a steady supply of hot water ready to come out of the tap right away.
While waiting a few minutes to get hot water is more of an inconvenience than anything else, it can also be quite wasteful. Unless you collect that unused cold water in a bucket to reuse in your garden or elsewhere around your home, it all just goes straight down the drain. With a hot water recirculating pump, cold water sitting in your pipes will go back to the water heater, bringing new hot water to the faucet so that it is ready whenever you are.
Because of frequent drought conditions and water restrictions here in California, the state’s Building Energy Efficiency Standards now require all new homes to include hot water recirculating pumps if they have any faucets that are farther than 50 feet from the water heater. The goal of this policy is to prevent water waste as homeowners wait for the hot water to arrive. Even if your home is older and not required to follow this new rule, it can still be a good idea to make the switch. Here’s what you need to know.
When you have separate handles for hot and cold water, you expect hot water to come out of when you turn the hot handle and vice versa. So, why is it that you get a stream of cold water from your hot tap before the water heats up? The answer is that leftover water in the pipes has cooled over time.
When you operated the hot water tap the last time you needed it, the water shuts off as soon as you turn off the tap. However, the hot water had to travel from your water heater to the faucet for you to use. When you turned the tap off, there was still plenty of hot water in transit. With the faucet turned off, there is nowhere for that hot water to go, so it just sits there in your pipes. Over time, it will gradually lose its heat, leaving cold water behind in your hot water pipes.
Then, the next time you turn on the hot water, that cold water in the pipes has to make its way out before fresh hot water can come through. This is the cold water that you feel for the first minute or so after turning on the tap. Once the hot water has had enough time to make its way from the water heater to the faucet, forcing all of the cold water out along the way, you’ll get the hot water you need. The farther the distance between your water heater and faucet, the longer it will take for the hot water to reach you, and the more water you will waste in the process.
To minimize water waste while waiting for hot water, you can have a recirculating pump installed on your water heater. These pumps return any unused hot water to your water heater to maintain its temperature while also sending fresh hot water to your faucets so that you don’t have to wait for the water to heat up. Hot water recirculating pumps generally fall into two primary categories.
In this type of system, your plumber will install additional hot water pipes in your home. These pipes can then return the unused hot water to the water heater. As the cooling hot water makes its way back to the water heater, new hot water can take its place so that it is always ready to go when you need it. The hot water flows through a continuous loop throughout your system so that there is a steady supply of hot water, minimizing your wait time and water waste.
If you are concerned about how this constant operation might affect your energy costs for heating the water, there is no need to be. While the system is capable of running continuously, it doesn’t always do this. Most hot water recirculating pumps come with sensors or timers to regulate operation. Sensors can detect the temperature of the hot water in the pipe, only running the recirculation pump when the temperature drops below a specified level. This way, the water won’t keep circulating when the water is already warm, typically stopping itself after one complete cycle.
Timers give you even greater control over when your system operates. For example, you can program your system to automatically turn off after a specified time in the evening so that it isn’t running while you are sleeping. You can also program the schedule to turn the system off when you are at work or go out of town on vacation.
Even if the hot water recirculating pump you choose doesn’t come with a sensor or timer, your plumber can easily install one for you. This way, you’ll get all the benefits of having more control over your system without having to select an entirely new pump system.
During the installation process, your plumber will need to install additional piping throughout your home to carry the unused hot water back to the water heater. This can add to your installation cost considerably, especially if the pipes in your home are difficult to access. If you don’t want to weather the added cost, or if the installation would be too complex, you do have another option.
To avoid having to install new pipes, you can opt for a hot water recirculating pump that sends unused water back to the water heater through your cold water pipes rather than through a separate pipe system. This option is much more cost-effective and easier to install, making this style of system accessible to a wider range of homeowners. However, you’ll still get the benefit of fast hot water when you need it.
Comfort systems do come with one major drawback, though. Because the hot water will flow back to the water heater through the cold water pipes, the water that comes out of the cold tap at first will likely be warmer than you are used to. It may also take a few moments for the water to get truly cold. In most cases, this won’t be much of an issue, as lukewarm water is perfectly fine for many applications around the house, like cleaning and cooking. However, if you use your tap to provide drinking water, you may have to wait until the water is cool enough to be palatable.
You can combat this issue when you know you are going to need cold water by turning off the pump temporarily. This method is particularly effective during the summer. Because the weather is warmer during this time of year, you won’t need to run the pump as frequently to get hot water anyway, as the water already in the pipes will stay hot longer.
While the most obvious benefit of hot water recirculating pumps is that you’ll have access to virtually instant hot water from every sink in your home, you’ll also be saving a lot of water. Because there are so many factors that go into calculating the water savings, it is difficult to quantify exactly how much you’ll conserve, though some estimates place the amount as high as 15,000 gallons per year. However, certain factors can increase or reduce your savings.
For starters, the size of your pipes plays a major role. Pipes with larger diameters can carry a lot more water than their narrower counterparts, so you’ll see the greatest savings if you have pipes that are on the wider side. The distance between your water heater and faucets is important as well. If your hot water previously had to travel a long way to reach the tap, your savings will be higher than if your faucets were closer to the water heater.
When choosing your hot water recirculating pump, your first decision should be whether you would prefer a full recirculating system or a comfort control system. Your budget and the configuration of your home will be among the most important factors in this decision. If plumbers can easily gain access to your pipe system and you can afford to pay a bit more, a full recirculating system will give you the greatest benefit, without the drawback of warming up your cold water on the return. To save money, time, and hassle, a comfort system may be the better option for you.
Once you have selected the style of system you would like, your next step is to choose a sensor or timer to control it. If you don’t want to have to worry about programming your system, a sensor can do the job for you by monitoring the water temperature in your pipes. To maximize the efficiency of your system, though, you’ll want to have the greatest possible control over when your system operates. For this, you’ll need a timer.
Simple, mechanical timers are easy to install and even easier to set. However, you may be limited in how detailed you can get with your timing. If your schedule changes from one day to the next, an electronic timer will give you greater flexibility. You can typically program several scenarios to accommodate changes in your daily schedule, like from workdays to the weekend or if your schedule doesn’t follow the typical work week.
It is also a good idea to insulate your hot water pipes, both heading to your faucets and back to the water heater. This will help to trap heat inside and prevent it from dissipating through the walls of the pipes over time. With proper insulation, the water will stay hotter for much longer, minimizing the number of times you have to run your pump throughout the day to keep hot water in the pipes at all times. This can result in major energy savings over time.
California is known for having hard water, and if you don’t have a water softener installed in your home, the minerals in the water can wreak havoc on your hot water recirculating pump. To help it last as long as possible, look for pumps made from stainless steel to minimize the risk of corrosion and prevent calcium deposits from forming.
You should also take note of the size of the inlets and outlets. As calcium deposits form in the pipes, they can narrow these openings over time. The larger the opening, the easier it will be for water to continue to flow through. Even with a bit of buildup, you’ll still have plenty of water coming through, maximizing the amount of time between maintenance services.
Here at Best San Diego Leak Detection, we are proud to include hot water services among our offerings. This includes installing, maintaining, and repairing water heaters and their associated accessories, like hot water recirculating pumps. We are experts at what we do and can help you narrow down your options to settle on the best recirculating pump to meet your needs and budget.
Our friendly associates are always happy to answer your questions, so don’t be shy about reaching out if there is anything you don’t fully understand. We’ll set you up with a free consultation appointment to discuss your needs and preferences in greater detail. Call now to get started.
July 16, 2019 Categories:Categories: