Link to Sunplus
https://eepurl.com/ip9ERk
Industrial grade lithium-ion batteries powering your remote or portable devices offer ruggedized design and high energy density for a long lifetime, even under extreme temperatures. Their longevity is directly related to the way the battery is charged, discharged and the operating temperatures.
In this article, we will explain how these batteries work and share our 5 top tips on how to charge your industrial-grade lithium-ion batteries to optimize their lifespan. You'll find out how balancing charging speed and rate is key for industrial applications, just as it is for your mobiles, laptops or e-bikes.
Read on'
Lithium-ion batteries are made of two electrodes: a positive one, and a negative one. When you charge or discharge your battery, electrons are going outside the battery through the electrical current and ions are flowing from one electrode to the other. It is like both electrodes are breathing, exchanging ions in and out.
When the battery provides current, electrons are moving from the anode to the cathode outside the battery. Applying reverse current allows the battery to recharge itself: the electrons are sent back to the anode and, the lithium ions re-intercalate themselves in the cathode. This restores the battery's capacity. The whole charging/discharging process is defined as a cycle. The number of cycles that your battery can perform varies depending on the manufacturing process, the chemical components, and the actual usage.
The capacity of a rechargeable battery is measured in Ah. Saft MP xtd boasts a 5.6 Ah capacity for example, which means that 5.6 A can be delivered in an hour at 25°C, over a cycle.
This capacity is being directly influenced by:
A good management of the depth of discharge (DoD 'the percentage of the capacity which has been removed from the fully charged battery) and of the maximum charging voltage can also enhance the number of cycles that the battery will be able to perform and therefore, its operating life.
This article focuses on the charging best practices but we'll go through the discharging ones in our next article.
Charging a lithium-ion battery is not that simple. The charger you will select has here a key role as the way you will set up parameters impacts your battery lifetime. Don't just plug it on any power supply nor use a charger designed for another technology (Nickel-Cadmium or Lead), if you don't want to face safety issues.
Charging properly a lithium-ion battery requires 2 steps: Constant Current (CC) followed by Constant Voltage (CV) charging. A CC charge is first applied to bring the voltage up to the end-of-charge voltage level. You might even decide to reduce the target voltage to preserve the electrode. Once the desired voltage is reached, CV charging begins and the current decreases. When the current is too low, the charge is finished, and the current must be removed.
For instance, to bring your MP xtd back to its 4.2V end-of-charge voltage, you can apply a 5.6A current. When reaching 4.2V, you maintain this voltage level by slowly decreasing the current to 100 mA or less and then stop it. You may also decide to reach 4.1V only, thus preserving the electrodes' elasticity and increasing the battery's lifetime.
The capacity of the battery depends directly on the end-of-charge voltage so lowering the voltage will lower the battery capacity. You'll have to find the right trade-off between the autonomy needed, the minimum voltage at which your device can operate and the longevity of the battery.
Leaving a battery on a permanent charge under a floating current after the CV mode during the charging process is called the floating mode. Solar panel is a typical example of a floating mode application.
Most manufacturers don't recommend the floating mode as it damages the battery over time. Li-ion chemistry does not need to be maintained thanks to its low self-discharge level. Moreover, if the battery design does not have the right safeguards, maintaining a charge rate into a fully charged cell could lead to overcharged it and an explosion.
Saft's xtd range is specifically designed to operate in floating mode in safe conditions with a limited aging on a wide temperature range.
Whichever the application, Li-Ion cells must be associated with electronics. This key electronic component is called a Battery Management System (BMS). The mandatory safety features interrupt the discharge/charge to protect the battery against overvoltage or undervoltage. The BMS checks the temperature and disconnects the battery to avoid overheating.
The BMS can also incorporate electronics optimizing a homogeneous charge between each cell in the battery pack (balancing). In a battery associating several cells connected in series, after a while in the field, cells from the pack will age differently. Without this balancing feature in the BMS, the most aged cell of the pack will age faster than the other. As the life duration of the pack is directly related to that most aged cell, a good balancing system will improve the battery's lifespan.
The BMS can be tailored to your use case. Some can display the State of Charge and the State of Health (ex: 85% of State of health means that the battery's capacity has decreased by 15% since the beginning of its life 'an interesting indication as it is understood that a 30% loss of the original capacity means the battery is reaching the end of its chemical life and replacement time is close).
At low charging speed (C/2, C/5 or even less), the lithium ions are intercalating themselves smoothly in the graphite sheets, without damaging the electrodes.
When the charge rate increases, this intercalation gets harder and harder. If the rate is too strong, Lithium ions have no time to penetrate the electrode properly and just deposit on its surface, which causes the battery to age prematurely.
Fast charging rates like 4C or 10C are possible, for example for mobile or electric vehicles batteries, but the electrode constructions are different, and the expected lifespan is shorter.
Depending on how much time your application needs to be recharged and your use case, you'll need to find the right trade-off between the necessary charging time and speed and the aging of the battery. A C/50 charging rate is better for the electrodes but not every application can afford more than 50 hours charging time! A 2C charging time (30m) is possible but will accelerate the aging of the battery.
Therefore, Saft recommends limiting the charge rate of its MP range to C or less.
Most Li-Ion batteries use graphite type material in one electrode. An elevated charging temperature provokes the exfoliation of the graphite sheets which hastens permanent capacity loss in the battery. This phenomenon can be aggravated when associated to a high charging rate: the charging current increases the temperature and causes an acceleration of the exfoliation phenomenon.
A high voltage level coupled to a high temperature causes the electrochemistry to generate gases inside the cell which accelerates chemistry ageing. Depending on the cell construction, high temperatures can also generate cell swelling. Such a deformation can cause safety hazards when the battery casing or device location have not been designed to support it. Make sure not to exceed the limits set by the battery manufacturer, or 'for example' put a cell on full charge for an extended amount of time in an overheated car in the height of summer!
If the battery design does not include the mandatory safeguards to avoid overcharge, over-discharge and over temperature, a cell internal temperature higher than 130°C could lead to a thermal runaway.
Most li-ion batteries can only withstand a maximum temperature of 60°C and are recommended to be charged at a maximum of 45°C under a C/2 charge rate, whereas Saft's MP range can sustain a C charge rate up to 60°C and even C/5 up to +85°C for the xtd products thanks to its unique design.
Very few batteries can be charged below 0°C. The electrode sheets contract and the electrolyte electronic conductivity gets lower which complicates the intercalation of the ions in the graphite. Lithium deposit can be generated which cause permanent capacity loss. To compensate and allow for the ion to intercalate properly, some manufacturers recommend charging the battery at very slow rate (C/20) when operating below 0°C.
Saft's MP range can handle charges at very cold temperatures 'up to -30°C!' when applying C/8 and even C/5 rates.
Let's summarize our 5 top tips on how to charge your industrial-grade lithium-ion batteries to optimize their lifespan:
See our next article offering more tips to optimize your lithium-ion battery when in operations!
For more information on Saft MP rechargeable range, visit the product page: https://www.saftbatteries.com/products-solutions/products/mp-small-vl
And if you'd like to read more about how our batteries operate, check out our case studies:
Fuji Tecom is preventing water leakage and offering more efficient operation thanks to an innovative water leakage detector
Kongsberg Seatex AS : An autonomous Saft battery solution to monitor the seas despite extreme cold in the Svalbard archipelago
Today, lithium-ion batteries are the first choice for powering up every electronic device. Lithium batteries are popular because of their battery's ability to store high-density power within a minimal footprint. Now, even a small remote of your car key is also equipped with a small lithium ion battery, providing usability for a long time. To acknowledge the importance of these small lithium batteries, this article will talk about a small lithium ion battery's usability, specs, and future development.
Lithium ion batteries come in many sizes and power ranges. But we are here to talk about specifically a small lithium ion battery. A small lithium battery is a battery with limited lithium or power capacity. It usually comes in small sizes. The US Department of Translation (DOT) defines a small lithium ion battery containing 8 grams of equivalent lithium content in the battery.
According to the International Air Transportation Association (IATA), a small lithium battery has no more than 100wh (watts hour) capacity. So, a small lithium ion battery is physically small in size, often measuring in millimeters, with a limited energy capacity. Most of these batteries power up small electric devices like earbuds, remotes, smart keys, tiny cameras, drones, etc.
The company is the world’s best low maintenance low voltage lithium battery supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
In the realm of a small lithium ion battery, two dominant types are competing with each other. The first is a small lithium polymer battery, and the second is a small LiFePO4 battery. Both utilize lithium ion technology for recharging and delivering power.
Chemistry
Here is an expanded comparison table includes more detailed specifications of a small lithium polymer battery (LiFo) and a small lithium LiFePO4 battery.
Don't undermine the small size of a lithium ion battery, but see the key feature inside these batteries that makes them so popular. These come with many features that are widely accepted all over the globe. Here are some of the key features of a small lithium ion battery:
1. High Energy Density
Though lithium ions come in every size, the thing that makes lithium ideal for electronic devices is its high energy ratio. A small lithium battery can power the device for many days.
2. Long Cycle Life
The lifespan of a small lithium battery is from 300 to 500 charge cycles. It does not lose efficiency for a long time and covers the initial buying cost of the battery.
3. Low Self-Discharge
One of the prominent features of a small li ion battery is the minimum usage of charge in standby condition. We often do not use the device for days and weeks. In such conditions, the battery can maintain the charge level and provide the same backup.
4. High Discharge Rate Capability
Though it is a small lithium battery, you can expect a high discharge rate when your device needs it during utilization. These batteries can constantly provide the same amount of power to the device till it reaches discharge level.
5. Wide Operating Temperature Range
They can function effectively under various temperatures, expanding their potential for use in environments with extreme conditions.\
6. High Charging Efficiency
Your small lithium ion battery can charge within 30 minutes to deliver many hours of backup. It utilizes the maximum input power into usable energy with minimum wastage during charging.
7. Low Maintenance
Lithium batteries are known as maintenance-free batteries. Once you have installed a small lithium battery, you will not need to look after or make frequent changes. Its long shelf life provides a stable solution for small electrical gadgets.
Despite its diminutive size, a small lithium rechargeable battery packs a powerful punch. These tiny powerhouses are revolutionizing our daily lives, powering many devices, from smartphones and smartwatches to medical equipment and wearable technology. Their impressive energy density, long lifespan, and minimal maintenance requirements make them ideal for powering our increasingly portable and interconnected world.
1. Portable Electronics
Now, we are always connected with the help of portable electronics like smartphones, laptops, tablets, headphones, earbuds, etc. These devices heavily rely on small lithium batteries as a power source. Therefore, a small lithium polymer battery is ideal for these devices.
2. Wearable Devices
A small lithium battery enables your wearable devices, including smartwatches and fitness trackers, to keep running. A quick charge of these wearable devices can provide backup for over a week.
3. Medical Devices
Today small li ion batteries are taking part in saving people's lives. Devices like peacemakers, insulin pumps, and hearing aids utilize a small lithium ion battery for running. So indirectly, these batteries are a part of medication for patients.
4. IoT Devices
Smart Home Devices Sensors use these small, battery-powered devices that require minimal energy to collect data and communicate wirelessly.
5. Power Tools
Cordless Drills, Saws, etc also utilize a small li ion battery having a high-discharge rate battery to deliver the power needed for various tasks.
6. Aerospace and Defense Applications
With the adoption of a new technology of drones, satellites, and military equipment utilization of lithium ion batteries is always a basic requirement. It provides these applications with compact, lightweight batteries with high energy density for long-range operation.
A small lithium ion battery greatly impacts the electronic industry and modern technology. It helps shape the innovative ideas of modern electronic devices like earbuds, mini cameras, drones, etc. As technology continues to evolve, we can expect some more new and advanced electronic gadgets powered by a small lithium ion battery in the future. However, lithium batteries need to be safer and long-lasting for more adaptability in electronic devices.
Related Tags:
Gerald
Electronic Engineering Writer
If you are looking for more details, kindly visit AC Coupled Battery Inverter for France.